Today we’re going to show you how easy it is to install your keychain remote for your alarm system. The keychain remote may either have two or four buttons. Both will be installed the same.
Before installing any piece of equipment make sure to have a Protect America security expert on the phone. They will guide you and add your new piece of equipment into the monitoring station’s sensor information so that it is numbered correctly. For example, if your monitoring station sees sensor “5” is sending a signal, they will know its a keychain and know that there is an emergency. If its not named at all or incorrectly, they could see it as a regular alarm rather than an immediate emergency. By pressing the keychain’s lock and unlock button simultaneously, you send a panic signal which immediate dispatches authorities. That’s just another reason why keychain remotes come in handy for your alarm system.
Here are the steps to installing your keychain
Begin by finding the arrow keys next to the LCD screen.
1. SCROLL DOWN TO SYSTEM PROGRAMMING
2. PRESS OK.
3. PRESS **** (this code will only be obtained by speaking to our experts in our CARE Department)
4. PRESS OK
5. SCROLL DOWN TO SENSORS
6. PRESS OK 2 TIMES
7. PRESS AND HOLD LOCK AND UNLOCK SAME TIME UNTIL PANEL BEEPS
8. 10 WILL BE FLASHING, SCROLL DOWN TO 1
9. PRESS OK
10. FRONT DOOR WILL BE FLASHING, SCROLL DOWN TO KEYCHAIN
11. HIT OK 2 TIMES
12. PRESS STATUS 5 TIMES TO BACK OUT
For more information call 1-800-951-5111 to speak with our CARE department and have an expert guide you to install your keychain. You can also try out our CHAT feature on our website so you can actually speak to one of our CARE agents immediately.