If you are contemplating or about to install security cameras in or around your home, it is likely you will want to position them appropriately so they do the best job possible in giving you the protection you desire. Putting a camera in the wrong spot can actually give you the opposite effect when it comes to protecting your home. Some of the problems of poor planning include:
- Thieves will know a camera’s whereabouts, making it easier to steal
- Cameras will be placed where they become damaged, causing you to waste your hard-earned cash
- Security cameras will not pick up footage helpful to those who want protection
Think outside of the box. Here are a few tips to keep in mind when doing a camera installation.
Keep Some Cameras In View, Keep Others Hidden
Most people want to place cameras in unobscured locations around or in their homes to help to catch perpetrators who decide to try breaking and entering. This is beneficial, however, it is a good idea to place one or two cameras in spots where they will be likely to be seen, as well. This will help to alert a thief about the home’s protection, making it less of a target overall as a result. A thief will not want to try to get into a home where they will be caught. If cameras are seen, they will move on to another location instead. In addition to cameras in view, hiding cameras in spots where they will not be seen will help to get information if a robbery does occur. Place cameras in trees, behind light fixtures or sculptures, or in shadowed corners will they are not likely to be seen.
Keep The Surroundings In Mind When Picking Out Installation Locations
Cameras placed outdoors will require a bit of pre-planning to their installation to help to keep them from becoming damaged. Placing cameras in spots where they are subjected to direct sunlight will not only cause peeling or fading of the outer layer of the equipment, but will also make it harder to obtain clear footage. Placing cameras in obscured areas, such as under eaves of porches or rooftops, or inside of yard decor will help to keep them out of view and away from damaging circumstances.
Never place cameras in spots where they are at risk of moisture damage. Using structures and solid decorative items to shield cameras will help to keep intricate systems dry and working properly when needed. If necessary, construct a small roofing area above a camera to keep it protected from water dripping. Alternately, a clear plastic enclosure will work well at keeping a camera protected.
Determine Susceptible Areas And Test Equipment To See The View
Instead of slapping cameras along the perimeter or inside of your home in hopes that they will help to keep robberies at bay, it is best to think about their positioning before installation. Thinking like a thief can be beneficial in finding the right spots for camera installation. Check the exterior of your home for areas where a thief can hide out and try to get inside without being seen. These troublesome areas may require some landscaping changes along with the addition of cameras.
Make sure to point a camera toward your home, as well as another one in the direction of where a perpetrator will gain entry to your property. Seeing more than one angle will increase the chances of catching someone in the act, in turn minimizing the chance of them getting inside of your home. Check monitors for the crispness of images obtained and make adjustments accordingly if lighting or the angle is not adequate. Too much or not enough illumination can make it difficult to see details.
Are you looking to enhance the security features present in your own home? If so, checking out a website like Protect America will get you started. Browse the selection of security features they have available and get further information by reaching out to speak to a representative. Do not put your home at risk any longer. Get a free quote here and find out just how affordable protecting your home is.