Many people have carbon monoxide detectors in their home to help alert them of the presence of this potentially deadly substance. While having this tool in place is certainly advisable, knowing how to react if a carbon monoxide detector beeps is equally as important. According to the National Fire Protection Association:

In 2010, U.S. fire departments responded to an estimated 80,100 non-fire CO incidents in which carbon monoxide was found, or an average of nine such calls per hour. … This increase is most likely due to the increased use of CO detectors, which alert people to the presence of CO.

These staggering statistics help in proving why the presence of a natural gas detector is a must. Here are some steps to take after this tester is heard making beeping noises in a home.

A red fire truck outside of a fire station

1. Get To Safety And Call A Fire Department

It is best to vacate the premises of a structure where a carbon monoxide detector is active. A phone call should be made to a local fire department to have the home checked over to determine the reason for the alarm going off.

If there is no verifiable reason, the detector may be in need of new batteries or the breaker feeding the electricity to the tester may have been switched to an off position. It is best not to take the time to check on this until after the home is checked as health risks would be present.

Products from

    2. Be Alert Of The Signs

    If someone in the home is displaying signs of illness, there could be carbon monoxide present. The symptoms associated with carbon monoxide exposure include:

    • Weakness
    • Dull headache
    • Nausea or vomiting
    • Shortness of breath
    • Weakness
    • Dizziness
    • Shortness of breath
    • Confusion
    • Loss of consciousness
    • Blurred vision

    If any of these symptoms are displayed, it is best to remove the person from the home and call for an ambulance immediately. A fire department should also be contacted to evaluate the home for any presence of carbon monoxide.

    3. Get Routine Checks Of Security Tools

    It is recommended to have regular checks of all safety devices within a home to make sure they are working up to par. A security system service will have representatives available to come to the home to do evaluations of carbon monoxide detectors, as well as other security enhancement features if necessary. Yearly checks are best to determine if there is a need for repair or replacement of these valuable tools.


    If there is a desire to find out more about carbon monoxide detector installation or service, contacting a company known for their dedication to their customers is best. Protect America is ready to assist with a wide variety of safety features and will give recommendations on the best fit for any household. Check out their website and be sure to stop by to get a free quote to find out what security features are within the desired price range today.

    A carbon monoxide detector in front of a white background

    How Do Carbon Monoxide Detectors Work

    So you know you want CO detectors but now you’re wondering “how do carbon monoxide detectors work?” Well, this is the right paragraph for you.

    CO detectors work to keep you and your family safe by sounding an alarm when a dangerous level of carbon monoxide is in your home. The three most common types of CO detectors have a biometric sensor, a metal oxide semiconductor and an electrochemical sensor.

    Biomimetic Sensor

    A biomimetic sensor uses a gel to detect dangerously high levels of CO in your home. This gel shifts colors when it senses carbon monoxide while another sensor alerts your detector of the change. This will cause the carbon monoxide detector to beep and warn your family.

    Metal Oxide Semiconductor

    CO detectors with a metal oxide semiconductor use a silica chip to determine when dangerous levels of carbon monoxide are in your home. When a metal oxide semiconductor recognizes dangerous levels of CO, it lowers the electrical resistance of the circuit it’s connected to. The decrease in electrical resistance makes your carbon monoxide detector beep.

    Electrochemical Sensor

    An electrochemical sensor uses electrodes in a chemical solution to alert when your home has high levels of CO. When the levels of carbon monoxide in your home are on the rise, the electrochemical sensor will lower the electrical current and will alarm your detector.

    Monitor CO Levels in Your Home with Protect America

    Protecting your home with a CO detector is a great way to keep harmful toxins out of your home. And with Protect America, you can keep the search for the right detector short. Our life safety technology includes CO detectors small enough for installing anywhere around your home for full protection. When dangerous levels of toxins are in the air, the detectors will sound. This gives your family enough time to take action and seek assistance. When you combine carbon monoxide detectors with professional monitoring, you’re not limiting yourself to just one tier of home security. You’re equipping your home with 24/7 professionally monitored systems. These systems are ready to keep you and your loved ones protected at all hours of the day.

    Interested in protecting your home with monitored home security? Click to get a free quote from Protect America.