Among the options for home security that most homeowners have are systems that provide glass break sensors. These sensors are designed to “hear” breaking glass, and sound an alert if they detect that noise. The right system for home security will offer these sensors, and will provide quality equipment that works well when needed and reduces the chances of false alarms. But how do glass break sensors actually work? And what causes them to have malfunctions and problems? It’s important to learn about glass break sensors — and the more a homeowner knows the more easily they can fix issues and feel secure in their home.

In order to really understand how a glass break sensor works, there’s no need to have a high level of technical knowledge. They’re actually relatively simple devices, and they aren’t complicated in nature. Because of that, most homeowners can install them if they opt for a security system with a DIY installation option. Then there’s no worry about whether the sensor is installed right and whether it will protect them in case of a break in. Additionally, these sensors can be tested with certain types of noises, in order to ensure that they’re performing correctly without actually breaking any glass near them.

What Does a Glass Break Sensor Look Like?

Glass break sensors are typically very small. They come in two different types — one of these is a round sensor that attaches to the wall or the ceiling in the room where the glass is located, and the other is a very thin, flat sensor that goes on the glass itself. Both of these can be a good choice, but some are easier to detect than others.

No matter which glass break sensor a homeowner selects, they need to understand how it works, what will make it not work, and how to properly test and maintain it.

When they know all of those things, they’ll have a lot more peace of mind about the particular sensor they’ve chosen. Then they can easily identify their glass break sensor and focus on ensure that it works the right way in order to keep their home, family, and belongings as protected as possible.

doorbell-cameras

Where Are These Sensors Located?

With a home security system, glass break sensors are normally located near the glass they’re protecting. Because they “hear” the sound when the glass breaks, they have to be close enough to the window or door to catch the noise. If they’re too close to something that makes a similar noise, though, they may go off a lot and offer the homeowner plenty of false alarms. Most commonly, glass break sensors are put either on the ceiling or the wall. There are also types of sensors that can be placed on the glass itself. These work in a similar way, but are not as popular.

How Can a Security Company Help?

A good security company can help by offering high quality equipment — including glass break sensors — that works well and will continue to be reliable. A homeowner looking into security companies should also look for:

  • 24/7 monitoring
  • ease of installation
  • good customer service
  • fast response times

All of those are important aspects of any security company, and they can provide a lot more peace of mind than would be seen if there wasn’t a good company backing the devices. In short, a system is only as good as the company that’s monitoring it, and a homeowner wants to make sure that company is one they can trust.

Interested in monitored home security? Get a free quote from Protect America.