DIY enthusiasts can think about building a home security system with Raspberry Pi, putting together everything from motion sensors to cameras. With the cost of a Raspberry Pi microcomputer ranging anywhere from $5 for the most basic Raspberry Pi Zero up to $35 for a Pi 3 Model B+, DIY builders could be tempted to put an entire home security system together based on an affordable price.

Adding wireless capabilities into a Raspberry Pi security system makes the project into an IoT system. The project can build in PIR (passive infrared sensors) sensors which can detect radiation inside your home. The PIR sensor will let the Raspberry Pi controller know if someone has entered a room, and the controller could notify you by text or email. All of these features of a Raspberry Pi home security system are interesting. Here are three things you might not have thought of if you’re considering building this type of security system and installing it in your house.

 

No One But You is Monitoring a Raspberry Pi System

You’re not at home; you’re at work. You might think burglars are dumb and we’ve heard of some dumb ones, like the guy from Shanghai who tried to break into a building with a brick but just ended up knocking out his accomplice. Let’s say a burglar slightly less dumb gets into your home and your Raspberry Pi home security system sends you an email. It even includes a picture of someone in your living room. All the Raspberry Pi system does is notify you something has triggered a motion detector. The camera may or may not send a useful image. Even if it does, you could be busy at work, away from your phone, or otherwise unable to see any image.

Burglars Can Get In And Out in Less Than 10 Minutes

Even if you see your Raspberry Pi home security system’s message immediately, you may not be able to notify authorities or get home in time to prevent a break-in. A burglary takes between 90 seconds and 10 minutes, and most burglars don’t take more than 60 seconds getting into a home.

Average Police Response Times Are 20+ Minutes for Non-Emergencies

If you’re not at home, most police departments will regard your call notifying them that your Raspberry Pi DIY home security system has detected an intruder as a “non-emergency” call. Some cities average 20 minutes or less for non-emergency response times. The average emergency response time is 11 minutes.

Burglars take less than 10 minutes to break in and remove electronics, money, and valuables. This is faster than even top average police burglary response times

Cities like Detroit and New Orleans have much longer non-emergency response times — in some cases up to an hour. You could miss your Raspberry Pi’s alert of an intruder for a few minutes, and make a call to your local police, and the burglar could have up to an hour to remove anything he or she wants from your property.

Low-Cost Equipment Isn’t No-Cost Equipment

Raspberry Pi equipment is affordable, starting at $5 for the lowest-cost credit card-sized microcomputer. Added items like Pi Cameras and controllers can start in the $5 to $6 range as well.

  • Higher-performance equipment costs more
  • Each component has a limited warranty
  • Warranties are issued by resellers, not Raspberry Pi
  • Not all components have any type of warranty
  • Higher-performance equipment can cost $30 to $50 per component (camera, WiFi)

These are just a few of the reasons why monitored home security is better than an unmonitored system, even one that you build and program yourself using a microcomputer like Raspberry Pi.

motion-detector-lights

Home security doesn’t have to be expensive. Protect America’s home security monitoring starts at $19.99 a month, and most of the equipment isn’t low-cost: it’s free. And the warranty isn’t limited, it’s a lifetime warranty. Protect America can help to protect your home and family with 24/7 security monitoring, combining professional round-the-clock monitoring with a simple, affordable system. Get a free quote today.